BRIEF INTRODUCTION£º The non rising stem gate valve, the whole body of strobe is treated with rubber up to good seal conquering bad seal, slack, rustiness and so on and saving installation space effectively. This valve widely applied in the liquid pipes for open or close fixed in such water, sewage disposal, electric power, energetics pipe, chemical, shipping, energy sources etc. FEATURES ¡ÑShot-blasting protective surface finished by shot-blasting and the surface is smooth and neatness. ¡ÑFlatting seat Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up. Making the liquid straightway. ¡ÑTreating with rubber Both inner and outer are coated with advanced knowledge of rubber vulcanization to the elasticity of rubber, and making sure the exact geometry dimension. Rubber and ductile cast iron valve are together hardly. This can avoid fall-off for long-term use. ¡ÑAnti- corrosion Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality of water supply. ¡ÑRuggedization The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop rupture depend on the good mechanics capability of ductile iron . ¡ÑThree ¡°¡ð¡± sealed ring With the three ¡°O¡± ¨C rings, the leakage can be greatly reduced and the ¡°O¡± ¨C ring can be replaced under this condition with pressure and without stopping water. The thrust axletree reduces the frictional resistance and lowers the operational torque. And it can be switch seal ring without opening and closing. ¡ÑRigid round body The body is founded minutely, the rigid geometry size ensure inner sealing of valve without any process. ¡ÑLight weight This body is made of ductile iron, it is 20%-30% lighter than the olds. Easy to fix and serve.
TECHNIC CRITERION Nominal pressure:1.0¡«1.6MPa Applicable medium: water, sewage, oil, gas etc. Applicable temperature:¡Ü120¡æ Main material of valve: ductile iron¡¢iron.
APPLICABLE STANDARDS ¡ÑAmerican Standard Design to ANSI/AWWA C509 Face to face dimension to ASME B16.10-2000(ISO 3 series) Flange and drilling To SME/ANSI B16.42-1998 ¡ÑBritish Standard Design to BS5163¡¢BS5150 Face to face dimension to BS5163(ISO 3series¡¢ISO19 series) Flange and drilling To BS4504 part1(EN1092) ¡ÑGermany Standard Design to DIN3352 Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series) Flange and drilling to BS EN1092
Item Name of part Material Spec .
NO | P art name | Material | 1 | Body | Ductile cast iron | 2 | Wedge | Ductile cast iron + EPDM | 3 | Stem nut | ZCuAl10Fe3 Gunmetal | 4 | Gasket | EPDM | 5 | Bonnet | Ductile cast iron | 6 | Gland gasket | ZCuAl10Fe3 Gunmetal | 7 | Stem | 2Cr13 S.S.x 20Cr13 | 8 | Gland | Ductile cast iron | 9 | Rubber wiper | EPDM/NBR | 10 | Hand wheel | Ductile cast iron |
Resilient seated non rising stem British standard, outline and connecting dimensions according to BS5163,(ISO 3 series);BS4504.3.2-89(10BAR);
Resilient seated non rising stem Chinese standard, outline and connecting dimensions according to GB12221-89(3)(ISO 3 series);GB/T17241.6-98(10 bar)
Diameter DN | O utside¡¡dimension | C onnection dimension | mm | inch | L | K | H | H0 | D0 | D | D1 | D2 | b | t | Z-d | 40 | 1-1/2 ” | 165 | 104 | 75 | 310 | 160 | 150 | 110 | 84 | 19 | 3 | 4-19 | 50 | 2 | 178 | 125 | 83 | 320 | 160 | 165 | 125 | 99 | 19 | 3 | 4-19 | 65 | 2-1/2 ” | 190 | 130 | 93 | 370 | 180 | 185 | 145 | 118 | 19 | 3 | 4-19 | 80 | 3 | 203 | 152 | 100 | 410 | 180 | 200 | 160 | 132 | 19 | 3 | 8-19 | 100 | 4 | 229 | 195 | 110 | 460 | 250 | 220 | 180 | 156 | 19 | 3 | 8-19 | 125 | 5 | 254 | 255 | 125 | 530 | 280 | 250 | 210 | 184 | 19 | 3 | 8-19 | 150 | 6 | 267 | 286 | 143 | 600 | 320 | 285 | 240 | 211 | 19 | 3 | 8-23 | 200 | 8 | 292 | 345 | 170 | 730 | 380 | 340 | 295 | 266 | 20 | 3 | 8-23 | 250 | 10 | 330 | 415 | 198 | 850 | 400 | 395 | 350 | 319 | 22 | 3 | 12-23 | 300 | 12 | 356 | 480 | 223 | 960 | 450 | 445 | 400 | 370 | 25 | 4 | 12-23 | 350 | 14 | 381 | 520 | 253 | 1070 | 450 | 505 | 460 | 429 | 25 | 4 | 16-23 | 400 | 16 | 406 | 576 | 283 | 1180 | 500 | 565 | 515 | 480 | 25 | 4 | 16-28 | 450 | 18 | 432 | 630 | 308 | 1300 | 500 | 615 | 565 | 530 | 26 | 4 | 20-28 | 500 | 20 | 457 | 695 | 335 | 1415 | 600 | 670 | 620 | 582 | 27 | 4 | 20-28 | 600 | 24 | 508 | 800 | 390 | 1630 | 600 | 780 | 725 | 682 | 30 | 5 | 20-31 | 700 | 28 | 610 | 910 | 448 | 1810 | 600 | 895 | 840 | 794 | 33 | 5 | 24-31 | 800 | 31-1/2 ” | 660 | 1020 | 508 | 2040 | 600 | 1015 | 950 | 901 | 35 | 5 | 24-34 | 900 | 36 | 711 | 1145 | 558 | 2350 | 600 | 1115 | 1050 | 1001 | 38 | 5 | 28-34 | 1000 | 40 | 811 | 1260 | 615 | 2580 | 600 | 1230 | 1160 | 1112 | 40 | 5 | 28-37 |
Resilient seated non rising stem British standard, outline and connecting dimensions according to BS5163,(ISO 3 series);BS4504.3.2-89(16BAR);
Resilient seated non rising stem Chinese standard, outline and connecting dimensions according to GB12221-89(3)(ISO 3 series);GB/T17241.6-98(16 bar)
Diameter DN | O utside¡¡dimension | C onnection dimension | mm | inch | L | K | H | H0 | D0 | D | D1 | D2 | b | t | Z-d | 40 | 1-1/2 ” | 165 | 104 | 75 | 310 | 160 | 150 | 110 | 84 | 19 | 3 | 4-19 | 50 | 2 | 178 | 125 | 83 | 320 | 160 | 165 | 125 | 99 | 19 | 3 | 4-19 | 65 | 2-1/2 ” | 190 | 130 | 93 | 370 | 180 | 185 | 145 | 118 | 19 | 3 | 4-19 | 80 | 3 | 203 | 152 | 100 | 410 | 180 | 200 | 160 | 132 | 19 | 3 | 8-19 | 100 | 4 | 229 | 195 | 110 | 460 | 250 | 220 | 180 | 156 | 19 | 3 | 8-19 | 125 | 5 | 254 | 255 | 125 | 530 | 280 | 250 | 210 | 184 | 19 | 3 | 8-19 | 150 | 6 | 267 | 286 | 143 | 600 | 320 | 285 | 240 | 211 | 19 | 3 | 8-23 | 200 | 8 | 292 | 345 | 170 | 730 | 380 | 340 | 295 | 266 | 20 | 3 | 12-23 | 250 | 10 | 330 | 415 | 203 | 855 | 400 | 405 | 355 | 319 | 22 | 3 | 12-28 | 300 | 12 | 356 | 480 | 230 | 970 | 450 | 460 | 410 | 370 | 25 | 4 | 12-28 | 350 | 14 | 381 | 520 | 260 | 1080 | 450 | 520 | 470 | 429 | 27 | 4 | 16-28 | 400 | 16 | 406 | 576 | 290 | 1190 | 500 | 580 | 525 | 480 | 28 | 4 | 16-31 | 450 | 18 | 432 | 630 | 320 | 1310 | 500 | 640 | 585 | 548 | 30 | 4 | 20-31 | 500 | 20 | 457 | 695 | 358 | 1440 | 600 | 715 | 650 | 609 | 32 | 4 | 20-34 | 600 | 24 | 508 | 800 | 420 | 1660 | 600 | 840 | 770 | 720 | 36 | 5 | 20-37 | 700 | 28 | 610 | 910 | 455 | 1820 | 600 | 910 | 840 | 794 | 40 | 5 | 24-37 | 800 | 31-1/2 ” | 660 | 1020 | 513 | 2045 | 600 | 1025 | 950 | 901 | 43 | 5 | 24-40 | 900 | 36 | 711 | 1145 | 563 | 2355 | 600 | 1125 | 1050 | 1001 | 47 | 5 | 28-40 | 1000 | 40 | 811 | 1260 | 628 | 2595 | 600 | 1255 | 1170 | 1112 | 50 | 5 | 28-43 |
Resilient seated non rising stem Germany standard, outline and connecting dimension according to DIN3202(F4)(ISO 14 series); BS EN1092.2(PN1.0MPa,10 bar){Figuration and connecting size of short series in Chinese standard are same with F4 series in Germany standard}
Diameter DN | O utside¡¡dimension | C onnection dimension | mm | inch | L | K | H | H0 | D0 | D | D1 | D2 | b | t | Z-d | 40 | 1-1/2 ” | 140 | 104 | 75 | 310 | 160 | 150 | 110 | 84 | 19 | 3 | 4-19 | 50 | 2 | 150 | 125 | 83 | 320 | 160 | 165 | 125 | 99 | 19 | 3 | 4-19 | 65 | 2-1/2 ” | 170 | 130 | 93 | 370 | 180 | 185 | 145 | 118 | 19 | 3 | 4-19 | 80 | 3 | 180 | 152 | 100 | 410 | 180 | 200 | 160 | 132 | 19 | 3 | 8-19 | 100 | 4 | 190 | 195 | 110 | 460 | 250 | 220 | 180 | 156 | 19 | 3 | 8-19 | 125 | 5 | 200 | 255 | 125 | 530 | 280 | 250 | 210 | 184 | 19 | 3 | 8-19 | 150 | 6 | 210 | 286 | 143 | 600 | 320 | 285 | 240 | 211 | 19 | 3 | 8-23 | 200 | 8 | 230 | 345 | 170 | 730 | 380 | 340 | 295 | 266 | 20 | 3 | 12-23 | 250 | 10 | 250 | 415 | 203 | 855 | 400 | 405 | 355 | 319 | 22 | 3 | 12-28 | 300 | 12 | 270 | 480 | 230 | 970 | 450 | 460 | 410 | 370 | 25 | 4 | 12-28 | 350 | 14 | 290 | 520 | 260 | 1080 | 450 | 520 | 470 | 429 | 27 | 4 | 16-28 | 400 | 16 | 310 | 576 | 290 | 1190 | 500 | 580 | 525 | 480 | 28 | 4 | 16-31 | 450 | 18 | 330 | 630 | 320 | 1310 | 500 | 640 | 585 | 548 | 30 | 4 | 20-31 | 500 | 20 | 350 | 695 | 358 | 1440 | 600 | 715 | 650 | 609 | 32 | 4 | 20-34 | 600 | 24 | 390 | 800 | 420 | 1660 | 600 | 840 | 770 | 720 | 36 | 5 | 20-37 | 700 | 28 | 430 | 910 | 455 | 1820 | 600 | 910 | 840 | 794 | 40 | 5 | 24-37 | 800 | 31-1/2 ” | 470 | 1020 | 513 | 2045 | 600 | 1025 | 950 | 901 | 43 | 5 | 24-40 | 900 | 36 | 510 | 1145 | 563 | 2355 | 600 | 1125 | 1050 | 1001 | 47 | 5 | 28-40 | 1000 | 40 | 550 | 1260 | 628 | 2595 | 600 | 1255 | 1170 | 1112 | 50 | 5 | 28-43 |
|